Slave Flash For canon POWERSHOT

$15.99
(No reviews yet) Write a Review
SKU:
4899-canon
http://d3d71ba2asa5oz.cloudfront.net/22001023/images/vivitar%20slave%20flash%20sf%203000-canon.jpg
New Page 1
    !!! BRAND NEW !!!   

DIGITAL SLAVE FLASH

C o r d l e s s

for

CANON

DIGITAL COMPACT CAMERAS

ONE YEAR WARRANTY

Fully Synchronized With Fill-in Flash And Red-Eye Reduction Flash

MADE BY

FULL U. S. A. FACTORY WARRANTY

Your Digital Slave Flash will work with CANON cameras ,unit can be used by switching to Slave On Mode. This device Features four slave modes that allow it to work with CANON cameras that fire their built-in-flash instantaneously  as well as cameras that have single or multiple flash red-eye reduction systems

you may also wish to use the Digital Slave Flash as an additional light from a different direction than your camera. Place your Digital Slave Flash where you want a second light illuminating the subject.

Direction Hot Shoe Photography

You may use this unit directly mounted to the hot shoe of your camera. Place the Mode select switch to the position of " Normal " and wait for the " Ready " light to glow. 

The flash comes complete with a bracket. Remote flash photography (when switches to Slave On Mode).

The device features 4 Slave Modes that allow it to work with cameras that fire their built-in Flash instantaneously or that have single or multiple flash red-eye reduction systems, unit is compatible with CANON  cameras with either built-in flash capability or not. It has a hot shoe so that it can be fired from the camera too. It is fully synchronized with fill-in flash and red-eye reduction flash and can be used CANON  digital cameras . It works as a slave. It can be set for a single flash camera or a pre-flash camera, or, it can detect which setting is best.

At Night Using The Built In Flash Alone.

Result Of The  Photo With Little Light

Photo Taken With Slave Flash, The Photo Leaves With Better Quality

SLAVE FLASH BENEFITS

Most point & shoot style digital cameras lack hot shoes and any means to fire a second flash unit. But a bracket-type flash that has a built-in slave sensor can be used to fire in sync with the camera's flash. Since digital cameras usually fire a series to flash bursts (to set focus, white balance, etc.) prior to the main burst of light, this slave flash should have a "smart" sensor. This type of sensor will ignore the pre-flashes and fire in sync with the primary burst of light.

A fully dedicated flash will interface with the camera's auto focus and auto-exposure system, while producing considerably more light for greater range and with more creative control than the built-in flash.

A studio flash system with multiple flashes on light stands can be used with digital cameras.

The primary issues are synchronizing the camera with the flashes and controlling exposure. Ideally, the camera will have a PC flash cord terminal or a hot shoe with a cord adapter to fire the flash system.

Otherwise the built-in flash can be used to trigger the slave-equipped studio flash.

The camera will need to have a flash mode that doesn't use pre-flashes, or a "smart" slave that ignores pre-flashes will need to be used. The camera will need to have manual exposure control so the exposure and light output from the studio flash can be balanced.

Ordinary flash units will not work because your digital camera lacks a way to connect and/or mount an external flash. Even more importantly, most digital cameras emit a “pre- flash” and/or a ‘red-eye” pulse that fire before the shutter opens, then an additional flash pulse is fired to actually light your picture. This “pre-flash” (“double-flash”) and/or “red-eye” pulse confuses other flash and slave units , causing them to go off at the wrong time, and are useless for your digital camera.

The Slave Flash has special digital pulse counting slave circuitry that is not fooled by the “pre-flash” and eliminates the need for an electrical connection to your camera. A three-position switch sets the flash to ignore one or two “pre-flashes”, or none at all.

The built in built in flash units of digital cameras are on average effective to only about 12 feet, and that's when your lens is at its widest-angle setting. When you want to zoom in on the action (towards the telephoto end of your zoom range) you'll find that your built in flash does exactly opposite of what you want, its range is reduced to about 8 feet, and sometimes even less! So, when you want to use your camera's telephoto capability that you paid for, but also require the built in flash, your pictures come out dark or, even worse, not at all.

In addition to its digital pulse counting slave circuitry, the Slave Flash comes equipped with quick release mounting bracket. The Slave Flash is compatible CANON

 

Specifications/font>

  • Brand: VIVITAR
  • Mode Selector Switch : ( 4 Positions ) - S1, S2, S3 & S4
  • Slave : Yes
  • Angle Of Coverage : Horizontal 60°
  • Ready Light : Yes
  • Flash Duration : (sec.) 1/1,000 - 1/20,000
  • Color Temperature : 5600° k
  • Power Source : 2AA Batteries Or NiMH
  • Recycling Time : 6 sec. ( With Alkaline Batteries ), NiMH 4 sec. Approx.
  • Compatibility : CANON  Digital Cameras With Flash Light Built-In

  • Flash Bracket: Included

The Flash Has A Hot Shoe And Can Be Attached Directly To Your Digital Camera's Accessory Shoe, If One Is Provided. If Your Digital Camera Does Not Have A Built-in Flash, The Flash Will Operate As A Slave Unit Next To Your Digital Camera. In This Case, Either Mount The Flash On The Accessory Shoe Of The Mounting Bracket (Supplied) And Attach Next To Your Digital Still Camera By Tightening The Knob.

Contents

  • VVIVITAR CANON Digital Slave Flash
  • Mounting Bracket With Accessory Hot Shoe
  • Operating Instructions
  • One-Year USA Warranty By VIVITAR