Think Tank Video Tripod Rolling Case Manager 44 TT-530

$349.75
(No reviews yet) Write a Review
SKU:
9774
https://d3d71ba2asa5oz.cloudfront.net/22001023/images/think%20tank%20video%20tripod%20manager%20tt-530-new.jpg

Photo Video Tripod

Manager 44

The Video Tripod Manager 44 from Think Tank is a rolling case that is designed to accommodate a video tripod and head combination measuring up to 9.8 x 40.2 x 9.8" when collapsed for storage or transport. This rolling case can also be used to provide compatible camera sliders, light stands, or other support systems with reliable protection during travel.

Within the Video Tripod Manager 44's crush-resistant, reinforced side panels, adjustable cushions throughout the main compartment allow support to be concentrated where it is needed most, such as around a tripod head's moving parts. An abrasion-resistant, zippered closure extends around this rolling case's top and bottom, as well as down one side. After the Video Tripod Manager 44's rear panel is placed against the ground so that its front panel faces upward, the main compartment can be reached by opening the zippered closure. Skid rails elevate the rear panel, protecting it from abrasions and moisture. After the zippered closure is released, the front panel can be flipped open to reveal two zippered, mesh pockets which can be used to store and organize gaffer tape, cables, or tools. Included touch-tab straps form two hinges along the inside edges of this rolling case, preventing the front panel from opening upwards at an angle greater than approximately 90°. While in place, the hinges help ensure that the inside of the front panel and its pockets face the user and are easy to reach when accessing the main compartment. Multiple tie-down straps with convenient side-release buckles prevent a video tripod or other support device from shifting during transport, and the Video Tripod Manager 44's internal bottom lining features an easy-to-clean surface designed for tripod feet or other components that routinely come into contact with floor surfaces.

Eight handles are included for flexibility while moving this rolling case; a top handle, a bottom handle, and six side handles, three of which are distributed along each side. For security, an integrated cable with combination lock along the top handle can be used to chain the Video Tripod Manager 44 to an immovable object such as a pole. Also along the top handle is a clear pocket that can be used to hold documents for easy retrieval, a contents label, or owner information. In the event of loss or theft, the ID plate between the skid rails can be registered at the Think Tank website to facilitate the recovery of a Video Tripod Manager 44.

Nylon construction throughout this rolling case and a polyurethane-coated underside provide a high degree of weather resistance. The Video Tripod Manager 44's overall durability is further complemented by tall wheel housings that protect its corners from impacts to escalators as well as curbs, and if they wear out over time, the wheels are user-replaceable.

  • Designed to accommodate a video tripod and head combination measuring up to 9.8 x 40.2 x 9.8" when collapsed for storage or transport

  • Provides reliable travel protection for compatible camera sliders, light stands, or other support systems

  • Crush-resistant, reinforced side panels

  • Adjustable cushions throughout the main compartment allow support to be concentrated where it is needed most, such as around a tripod head's moving parts

  • Abrasion-resistant, zippered closure for main compartment with large zipper pulls

  • Integrated touch-tab flap further protects main compartment zippered closure from abrasions

  • Skid rails elevate rear panel, protecting it from abrasions and moisture when placed on the ground so main compartment faces upward when front panel is opened

  • Front panel can be flipped open to reveal two zippered, mesh pockets which can be used to store and organize gaffer tape, cables, or tools Included touch-tab straps form two hinges that help ensure that the inside of the front panel and its pockets face the user and are easy to reach when accessing the main compartment

  • Tie-down straps with convenient side-release buckles prevent a video tripod or other support device from shifting during transport

  • Internal bottom lining features an easy-to-clean surface designed for tripod feet or other components that routinely come into contact with floor surfaces

  • Eight handles; a top handle, a bottom handle, and six side handles, three of which are distributed along each side

  • Lock and cable systems secure entire rolling case to a fixed object

  • Clear pocket along top handle can be used to hold documents for easy retrieval, a contents label, or owner information

  • ID plate between the skid rails can be registered at the Think Tank website to facilitate the recovery of a Video Tripod Manager 44 in the event of loss or theft

  • Durable, weather-resistant construction

  • Loose nylon-webbing from the adjustment belt can be neatly tucked through the nylon loop on the sling strap

Think Tank PhotoTripod Manager 44 Specs 

Materials Exterior:  Water-repellent coating, polyurethane-coated underside, 168-denier ballistic nylon, abrasion-resistant zippers, extra tall skid plates, replaceable wheels, nylon webbing, and 3-ply bonded nylon thread
Interior:  210-denier silver-toned nylon, 420 high-density nylon, closed and open cell foam cushioning, reinforced side panels, mesh pockets, and 3-ply bonded nylon thread
Carrying/Transport Options  One top handle
Six side handles
One bottom handle
Type of Closure Zipper
Exterior Dimensions 12.6 x 44.5 x 12.6" (32.0 x 113.0 x 32.0 cm)
Interior Dimensions 9.8 x 40.2 x 9.8" (25.0 x 102.0 x 25.0 cm) 
Weight   17.6 lb (8.0 kg)