Vivitar Flash Bounce Zoom Slave Flash VIV-SF4000-BX-N for NIKON D5100 D7000 D3000 D300 D90 D40 D40X

$42.99
(No reviews yet) Write a Review
SKU:
4829-NIKON
http://d3d71ba2asa5oz.cloudfront.net/22001023/images/vivitar%20slave%20flash%20sf%204000-nikon.jpg
New Page 1
    !!! BRAND NEW !!!   
 

BOUNCE ZOOM DIGITAL  SLAVE FLASH

FOR

NIKON

WILL ONLY WORK WITH

CAMERA THAT ARE LISTED

ONE YEAR WARRANTY

COMPATIBLE NIKON CAMERA

Untitled 2

NIKON CAMERA NIKON CAMERA NIKON CAMERA NIKON CAMERA
Nikon D1 Nikon D2X Nikon D3S Nikon D60
Nikon D100 Nikon D2Xs Nikon D3X Nikon D70
Nikon D1H Nikon D3 Nikon D40 Nikon D700
Nikon D1X Nikon D4 VCC113 Nikon D7000
VCC113 Nikon D300 Nikon D40x Nikon D7100
Nikon D200 Nikon D3000 Nikon D50 Nikon D70s
Nikon D2H Nikon D300S Nikon D5000 Nikon D80
Nikon D2Hs Nikon D3100 Nikon D5100 Nikon D90
Nikon D800 Nikon D3200 VCC113 Nikon E3
VCC113 Nikon D3300 2-2015 Nikon NASA F4
VCC113 Nikon D5500 VCC113 Nikon D3
Nikon D810 Nikon D5300 Nikon Df Nikon D750
Nikon D810a Nikon D5200 Nikon D7200 Nikon D610
Nikon D4s Nikon D4
       
       
       
       

ONE YEAR WARRANTY

Use With NIKON

Fully Synchronized With Fill-in Flash And Red-Eye Reduction Flash

GUARANTEED TO WORK WITH CAMERA LISTED

Your Digital Slave Flash will work with NIKON cameras that have a built in hot shoe, by connecting this device to the camera's hot shoe and switching the unit to NORMAL Mode. If your camera does not have a built in hot shoe this unit can be used by switching to Slave On Mode. This device Features four slave modes that allow it to work with NIKON cameras that fire their built-in-flash instantaneously  as well as cameras that have single or multiple flash red-eye reduction systems

PLEASE CHECK YOUR CAMERAS OWNER MANUAL TO DETERMINE WHICH FLASH SYSTEM YOUR CAMERA HAS

The flash comes complete with a bracket. This device is workable for both direct hot shoe photography (when switches to Normal Mode) and remote flash photography (when switches to Slave On Mode).

The device features 4 Slave Modes that allow it to work with cameras that fire their built-in Flash instantaneously or that have single or multiple flash red-eye reduction systems, unit is compatible with NIKON  cameras with either built-in flash capability or not. It has a hot shoe so that it can be fired from the camera too. It is fully synchronized with fill-in flash and red-eye reduction flash and can be used NIKON  digital cameras . It works as a slave. It can be set for a single flash camera or a pre-flash camera, or, it can detect which setting is best.

At Night Using The Built In Flash Alone.

Result Of The Photo With Little Light

Photo Taken With Slave Flash

Result Of The Photo With Better Quality

! SLAVE FLASH BENEFITS !

Most point & shoot style digital cameras lack hot shoes and any means to fire a second flash unit. But a bracket-type flash that has a built-in slave sensor can be used to fire in sync with the camera's flash. Since digital cameras usually fire a series to flash bursts (to set focus, white balance, etc.) prior to the main burst of light, this slave flash should have a "smart" sensor. This type of sensor will ignore the pre-flashes and fire in sync with the primary burst of light.

A fully dedicated flash will interface with the camera's auto focus and auto-exposure system, while producing considerably more light for greater range and with more creative control than the built-in flash.

A studio flash system with multiple flashes on light stands can be used with digital cameras.

The primary issues are synchronizing the camera with the flashes and controlling exposure. Ideally, the camera will have a PC flash cord terminal or a hot shoe with a cord adapter to fire the flash system.

Otherwise the built-in flash can be used to trigger the slave-equipped studio flash.

The camera will need to have a flash mode that doesn't use pre-flashes, or a "smart" slave that ignores pre-flashes will need to be used. The camera will need to have manual exposure control so the exposure and light output from the studio flash can be balanced.

Ordinary flash units will not work because your digital camera lacks a way to connect and/or mount an external flash. Even more importantly, most digital cameras emit a “pre- flash” and/or a ‘red-eye” pulse that fire before the shutter opens, then an additional flash pulse is fired to actually light your picture. This “pre-flash” (“double-flash”) and/or “red-eye” pulse confuses other flash and slave units , causing them to go off at the wrong time, and are useless for your digital camera.

The Slave Flash has special digital pulse counting slave circuitry that is not fooled by the “pre-flash” and eliminates the need for an electrical connection to your camera. A three-position switch sets the flash to ignore one or two “pre-flashes”, or none at all.

The built in built in flash units of digital cameras are on average effective to only about 12 feet, and that's when your lens is at its widest-angle setting. When you want to zoom in on the action (towards the telephoto end of your zoom range) you'll find that your built in flash does exactly opposite of what you want, its range is reduced to about 8 feet, and sometimes even less! So, when you want to use your camera's telephoto capability that you paid for, but also require the built in flash, your pictures come out dark or, even worse, not at all.

In addition to its digital pulse counting slave circuitry, the Slave Flash comes equipped with a built in hot shoe, quick release mounting bracket. The Slave Flash is compatible NIKON

Features

  • Ultra-light Weight
  • Built-In Digital Slave
  • Fit NIKON  Digital Cameras With Flash Light Built-In
  • Sturdy And Ultra Compact

Operation Elements

  • Battery Compartment Cover
  • Power Switch
  • Multi Angle Bounce Flash Head
  • Auto Pre-Flash Sensor
  • Mounting Foot
  • Accessory Shoe
  • Bracket
  • BBracket Screw